基于纳米Nb_2O_5/石墨烯复合材料的增强效应电化学测定绿原酸

制备了Nb_2O_5/石墨烯修饰玻碳电极(Nb_2O_5/RGO/GCE),建立了一种简便、灵敏检测绿原酸的电化学方法。用氧化石墨烯(GO)和五氯化铌(Nb Cl5)一步溶剂热法制备Nb_2O_5/RGO复合材料,并用扫描电子显微镜(SEM)对其进行形貌表征。采用循环伏安法(CV)和方波伏安法(SWV)研究了绿原酸在Nb_2O_5/RGO/GCE上的电化学行为。结果发现,Nb_2O_5/RGO复合材料能显著增强绿原酸的电化学活性。对实验条件(如pH值、扫描速率与富集时间等)进行了优化。在最佳条件下,绿原酸的氧化峰电流与浓度在5.0×10~(-7)~1.2×10~(-5)mol/L范围内呈良好的线性关系,检出限为2.0×10~(-7)mol/L。采用修饰电极测定各种药物中绿原酸的含量,得到加标回收率为96.6%~101.5%。该方法具有良好的灵敏度和稳定性,已成功应用于药物中绿原酸含量的测定。     

纳米金-还原氧化石墨烯修饰葡萄糖氧化酶传感器的制备及其电流法检测饮料中的葡萄糖

利用纳米金(Au NPs)与还原氧化石墨烯(rGO)复合纳米材料制备了葡萄糖氧化酶生物传感器并用于饮料中葡萄糖含量的检测。将壳聚糖作为还原剂及稳定剂,通过一步法合成了Au NPs-rGO复合材料,并通过物理吸附固定葡萄糖氧化酶(GOx)来制作GOx生物传感器。该传感器在磷酸盐缓冲溶液(0.1 mol/L,p H6.0)中,-0.45 V(vs.Ag/Ag Cl)电位下电流法检测葡萄糖含量,线性检测范围为0.01~0.88 mmol/L,灵敏度为22.54μA·mmol-1·L·cm-2,检出限为1.01μmol/L,且表观米氏常数为0.497 mmol/L。该传感器用于多种饮料中葡萄糖含量的直接检测,结果满意。     

氧化铜-过氧化聚吡咯-还原氧化石墨烯复合膜修饰电极非酶检测葡萄糖

先以氧化石墨烯(Graphen oxide,GO)为阴离子掺杂剂,采用电化学聚合法制备了聚吡咯-氧化石墨烯复合膜(PPy-GO)。分别在0.10 mol/L Na Cl和0.10 mol/L NaOH溶液中对其进行还原和过氧化处理,制得过氧化聚吡咯-还原氧化石墨烯复合膜(OPPy-ERGO)。再以此OPPy-ERGO复合膜为载体,采用电化学沉积法制备了氧化铜-过氧化聚吡咯-还原氧化石墨烯复合膜修饰电极(CuO-OPPy-ERGO/CCE)。通过扫描电镜和电化学方法对此电极进行表征,研究了葡萄糖在此修饰电极上的电化学行为。结果表明,此电极对葡萄糖的电氧化过程表现出高的催化活性和良好的抗干扰能力。在0.20 mol/L NaOH溶液中,安培法检测葡萄糖的线性范围为5.0×10~(-7)~1.0×10~(-3)mol/L,检出限(3Sb)为2.0×10~(-7)mol/L,灵敏度为121.8μA/(mmol·L~(-1))。该电极用于血清中葡萄糖含量的测定,加标回收率为96.0%~110.1%。     

Solid‐Phase Synthesis of a Seventh‐Generation Inverse Poly(amidoamine) Dendrimer: Importance of the Loading Ratio on the Resin

Here, this study overcomes the current barriers to efficient solid‐phase synthesis of high‐generation dendrimers by decreasing the loading ratio on the resin. G7 inverse poly(amidoamine) dendrimer is now prepared, for the first time, through a solid‐phase synthesis using only 50% of the available reactive sites and by choosing a large resin. This preparation takes only 15 d to afford highly pure product in 80% yield with precipitation being the only purification procedure used. The results clearly show the amount of the initial monomer loaded on the resin to be a vital factor for the ability to use solid‐phase synthesis to produce large dendrimers. This finding also sets stage for the applications of solid‐phase synthesis for the preparation of other macromolecules.

     

A Reduced Graphene Oxide‐based Electrochemical DNA Biosensor for the Detection of Interaction between Cisplatin and DNA based on Guanine and Adenine Oxidation Signals

A glassy carbon electrode (GCE) was modified by electrochemically reduced graphene oxide (ERGO) for subsequent dsDNA immobilization. The interaction of cisplatin with dsDNA was studied at this modified electrode. Quantitative investigations were performed by adsorptive transfer stripping voltammetry (AdTSV) using differential pulse voltammetry (DPV). The morphology and structure of graphene oxide (GO) and ERGO modified GCEs (GO/GCE and ERGO/GCE, respectively) were characterized by UV‐vis, FT‐IR, Raman spectroscopy and cyclic voltammetry. Compared with the bare GCE and the GO/GCE, the ERGO/GCE exhibited excellent electrocatalytic activity towards the oxidation of dsDNA due to guanine and adenine groups, testified by high oxidation peak currents and decreased oxidation potentials. The interaction of micromolar concentrations of cisplatin with surface confined dsDNA was readily detected as inferred from the decrease of the voltammetric oxidation peaks of guanine and adenine. This trend was significantly greater at the ERGO/GCE compared to the GO/GCE. The interaction of cisplatin with dsDNA was also studied in solution phase by AdTSV with detection at the ERGO/GCE.     

Fe_3O_4/RGO复合材料的制备及其电化学性能研究

以改进Hummers法合成的氧化石墨烯(GO)为前驱体,通过水热法结合烧结工艺制备了四氧化三铁/还原氧化石墨烯(Fe_3O_4/RGO)复合材料。利用X射线衍射(XRD)、拉曼光谱(Raman)、扫描电镜(SEM)、透射电镜(TEM)等手段对复合材料的理化性能进行表征;通过充放电测试、循环伏安(CV)和电化学阻抗谱(EIS)等技术,综合考察了材料的储锂性能及电化学性能增强机制。结果表明,在200和600 m A/g电流密度下,Fe_3O_4/RGO复合负极循环60次后的放电比容量分别保持在709和479 mAh/g,表现出良好的倍率性能;相较于纯Fe_3O_4负极,复合负极呈现出更优异的锂电性能,其电化学性能的改善得益于RGO能增强材料的电导性和结构稳定性。     

Optimisation of alignment materials for minimising residual retardation in in-plane switching liquid crystal display

The light leakage in a black state of in-plane switching (IPS) liquid crystal display (LCD) associated with rubbing process has been investigated. The mechanical rubbing process with a cloth caused orientation disorders in the liquid crystal directors and these partial orientation disorders result in residual retardations of the IPS LCD, causing the light leakages at the black state. In this study, we theoretically estimated how the light leakage is associated with the rubbing uniformity using 2 × 2 Jones matrix equation and also experimentally confirmed how it is associated with structural properties of the alignment layer. The light leakage was clearly reduced in the alignment layer with reduced crystallinity and flexibility.     

异相成核和拉伸诱导对生物基PHBV复合纤维结晶结构与力学性能的影响

采用熔融纺丝法制备了聚(3-羟基丁酸酯-co-3-羟基戊酸酯)(PHBV)/二硫化钨(WS_2)复合纤维.利用示差扫描量热仪(DSC)、热台偏光显微镜、二维广角射线衍射仪(2D-WXRD)、纤维强力仪研究了WS_2异相成核作用和牵伸诱导作用对纤维的结晶结构和力学性能的影响.研究表明,WS_2显著提高了PHBV的结晶温度,当使用2 wt%WS_2时,复合材料的结晶温度提高到115~130oC,比纯PHBV(99~105oC)提高了约25oC.WS_2不仅没有影响PHBV球晶的径向生长速率,且明显提高了PHBV/WS_2复合材料的晶核密度,熔体成核活性Φ由1.0降低为0.49.随着牵伸倍率和WS_2用量的增加,纤维的拉伸强度呈现出先增加后减小的趋势.当添加1 wt%WS_2并采用单向牵伸3.8倍时,纤维中的晶体取向产生了β晶结构,使复合纤维的拉伸强度由纯PHBV的37 MPa提高至155 MPa,断裂伸长率由2.4%增加至45%.     

Ni掺杂对Ni/MgO体系中电荷分配影响

采用密度泛函理论(DFT)计算方法,研究了载体Ni掺杂对Ni/MgO催化剂的电子结构及其对CH_4/CO_2重整反应的影响。结果显示,随着载体Ni:Mg比的增加,CH_4解离吸附和CH_x氧化过程的反应能垒均会随之升高,CH也更容易产生热解C,从而导致催化剂的活性和稳定性的下降。通过分析重整过程的Hirshfeld电荷分配,发现金属载体之间电子转移的方向会随着载体中Ni含量的上升由载体向Ni金属转移变为由Ni金属向载体转移。当Ni金属富电子时,反应物活化时电子的转移主要发生在表层Ni原子与吸附物种之间,参与氧化的CH_x物种为CH_2;当Ni金属缺电子时,反应物活化时Ni簇的电子结构基本保持稳定,电子主要在载体表层的Ni原子与反应物之间转移,CH是主要参与氧化的CH_x物种。     

Limit theorems for random walks

We consider a random walk $S_{\tau }$ which is obtained from the simple random walk $S$ by a discrete time version of Bochner’s subordination. We prove that under certain conditions on the subordinator $\tau$ appropriately scaled random walk $S_{\tau }$ converges in the Skorohod space to the symmetric $\alpha$-stable process $B^{\alpha }$. We also prove asymptotic formula for the transition function of $S_{\tau }$ similar to the Pólya’s asymptotic formula for $B^{\alpha }$.